c.Tilting Piston Replacement
1)Disconnect compressed air supply from the dryer.
2)Tilt, then level the dryer to exhaust as much air as possible.
3)Disengage “EMERGENCY STOP”
Discontinue electrical power to the dryer.
4)Remove the six (6) screws holding the piston cover plate.
5)Label the air lines as an aid when reconnecting.
6)Loosen the 3/8” compression fittings...
Remove the air lines.
7)Remove the 3/8” straight connector.
8)Remove the 3/8” elbow.
5 6
