G. CLEARING CREDIT/CLEARING CYCLE
In Coin Mode, credit can be cleared from the Phase 7 dual microprocessor controller (DMC) computer by pressing and holding the “PAUSE” 
key while entering the following key combination: 
key three (3) times followed by the “LO” 
key two (2) times and then the “MED” 
key one (1) time. Wait 
key and one (1) of the remaining keys. This will clear the credit. A flowchart of this procedure has been provided in Section VI of this manual.
A cycle in Free Mode can be cleared by first pausing a cycle and then pressing the “PAUSE” 
key once again to clear the cycle.
H. ACCESSING COIN VAULT
The coin vault can be accessed by placing the program switch into the “UP” position. Once the program switch is in the “UP” position, press the “HI” 
key. The Phase 7 DMC (computer) will now display the amount of money in the coin vault. Press the “HI” 
key again and the Phase 7 DMC (computer) will ask to “CLEAR COIN VAULT TOTAL?” Press “PAUSE” 
for “NO” or press “MED” 
for “YES”.
I. CLEARING FAULT RECORDS AND CREDIT
This feature allows the user to reset the coin vault, clear any credit still available for a cycle and ALL fault records. In order to activate this feature the Phase 7 DMC (computer) needs to be powered down and then restarted. Immediately after power has been applied to the Phase 7 DMC (computer) press and hold the “PAUSE” 
key and “HI” 
key simultaneously. The Phase 7 DMC (computer) will prompt the user with the following message “CLEAR FAULT RECORDS AND CREDIT?” Pressing “PAUSE” 
and any other key will indicate a YES, while pressing any key other than “PAUSE” 
will indicate a NO. Once the fault records, coin vault and credit are cleared, there is no way of restoring this information.
J. WRINKLE GUARD
This program keeps items
When the drying and cooling cycles are completed, the dryer will shut off, the tone will sound, and the liquid crystal display (L.C.D.) will read “CYCLE DONE”. If the door is not opened, the Phase 7 DMC (computer) will wait an initial 15 minutes delay time. Once the initial 15 minute delay time has expired, the fan will start and the basket (tumbler) will rotate (without heat) for an ON time of
9
