READY, INSERT
0.25¢ TO START
PROGRAM MODE
PL #01
CONTROL
SETTINGS
PL #02
MACHINE
SETTINGS
SELECT MODEL TYPE
SETTING AXIAL THERMISTOR INPUT
FROM READY MODE |
| |
TOGGLE PROGRAM |
| |
SWITCH TO UP | ON | |
POSITION. | ||
| ||
| PRESS "HI" OR | |
PRESS "MED" TO | "LO" TO TOGGLE | |
ENTER | AXIAL | |
THERMISTOR | ||
PROGRAM | ||
INPUT ON AND | ||
MENU. | ||
OFF. | ||
| ||
PRESS "HI" | OFF | |
ONE (1) TIME | ||
TO SCAN UP | PRESS "MED" TO | |
TO PL #02 | ||
SELECT AXIAL | ||
MACHINE | ||
THERMISTOR | ||
SETTINGS. | ||
INPUT AND | ||
| ||
| ADVANCE TO | |
| NEXT | |
| PARAMETER. | |
| THERMISTOR | |
PRESS "MED" TO | TEMP SETPOINT | |
100 TO 400 °F | ||
ENTER PL #02 MACHINE | ||
| ||
SETTINGS. | NOTE: PRESS "PAUSE" TO | |
| EXIT PL #02 MACHINE | |
| SETTINGS MEMORY | |
| LOCATION |
PRESS "HI" FOUR (4)
TIMES TO SCAN UP TO
AXIAL THERMISTOR
INPUT SETTING.
AXIAL THERMISTOR
INPUT
PRESS "MED" TO
ENTER AXIAL
THERMISTOR INPUT
PARAMETER.
37
