Standard Setup, Continued
Pri Master, Pri Slave, Sec Master, Sec Slave Select one of these hard disk drive icons to configure the hard disk drive named in the option. Select Auto from the drive parameters screen to let AMIBIOS automatically configure the drive. A screen with a list of drive parameters appears. Click on OK to configure the drive.
Drive Type | How to Configure |
SCSI | Select Type. Select SCSI in the drive parameter screen. The |
| SCSI drivers provided by the SCSI drive or SCSI host |
| adapter manufacturer should allow you to configure the |
| SCSI drive. |
IDE | Select Type. Select Auto to let AMIBIOS determine the |
| parameters. Click on OK when AMIBIOS displays the drive |
| parameters. |
| Select LBA/Large Mode. Select On if the drive has a |
| capacity greater than 540 MB. |
| Select Block Mode. Select On to allow block mode data |
| transfers. |
| Select |
| transfers. |
| Select the PIO Mode. It is best to select Auto to allow |
| AMIBIOS to determine the PIO mode. If you select a PIO |
| mode that is not supported by the IDE drive, the drive will |
| not work properly. If you are absolutely certain that you |
| know the drive’s PIO mode, select PIO mode 0 - 5, as |
| appropriate. |
Select Type. Select CDROM. Click on OK when AMIBIOS | |
| displays the drive parameters. |
Standard | Select Type. You must know the drive parameters. Select |
MFM Drive | the drive type that exactly matches your drive’s parameters. |
Non- | Select Type. If the drive parameters do not match the drive |
Standard | parameters listed for drive types 1 - 46, select User and |
MFM Drive | enter the correct hard disk drive parameters. |
Cont’d
Chapter 2 WINBIOS Setup | 35 |
