AP120BC1000-3/ AP120BCF1300-3 Manual
14
KEYBOARD KEYS
ON/OFF & START/STOP CYCLE KEYS
ON/OFF SOFT CYCLE
START/STOP HARD CYCLE
SHOCK CYCLE
PROGRAMMING KEYS AUTOMATIC CYCLE
UP MANUAL CYCLE
DOWN UV LIGHT CYCLE
SELECT DEFROST CYCLE
ENTER PRINT
HEAT PROBE CYCLE
KEY COMBINATIONS
¾ Initial Programming state – to initially set the device
o With the display reading "OFF", press and hold (“START/STOP”) for 5 seconds
¾ Cycles programming state – to initially set the cycles
o With the display reading "OFF", press (“ENTER”) for 1 second
¾ Recipe name programming state – to enter recipe names
o With the display reading "OFF", press (“A”) for 10 seconds
¾ Load default values state – to load the standard parameters
o With the display reading "OFF", press (”UP”) for 10 seconds
¾ Clear events memory state – to clear obsolete data
o With the display reading "OFF", press + (”UP”+”DOWN”) for 10 seconds
¾ Ready To Go state – in order to start a cycle
O If the controller is not "OFF", press “ON/OFF” once.