AP120BC1000-3/ AP120BCF1300-3 Manual
21
q. To change the temperature, press or
then press .
42 Blinks
The display will show:
PARAM. PROGRAMMING
AUTOMATIC HARD CYCLE
PROGRAMMING COMPLETE
PARAM. PROGRAMMING
AUTOMATIC SHOCK CYCLE PARAMETERS PROGRAMMING
A
fter about 2 seconds the display will automatically
change to:
The LED for "A" will be "ON".
The LED'S for cycles will be blinking.
r. Press the button (for shock freezers only).
The LED for "SHOCK" will be steady "ON".
s. To change the temperature, press or
then press . -25 Blinks
t. To change the temperature, press or
then press . -15 Blinks
u. To change the temperature, press or
then press . 0 Blinks
v. To change the temperature, press or
then press . -4 Blinks
w. To change the temperature, press or
then press . 3 Blinks
The display will show:
PARAM. PROGRAMMING
AUTOMATIC MODE
CHOOSE
PROGRAMMING CYCLE
AUTOMATIC HARD CYCLE
HOLDING HIGH TEMP.
42 °F
PARAM. PROGRAMMING
PARAM. PROGRAMMING
AUTOMATIC SHOCK CYCLE
LOW AIR TEMPERATURE
-25 °F
PARAM. PROGRAMMING
AUTOMATIC SHOCK CYCLE
HIGH AIR TEMPERATURE
-15 °F
PARAM. PROGRAMMING
AUTOMATIC SHOCK CYCLE
FOOD TEMPERATURE
0 °F
AUTO SHOCK CYCLE
PROGRAMMING COMPLETE
PARAM. PROGRAMMING
AUTOMATIC SHOCK CYCLE
HOLDING HIGH TEMP
3 °F
PARAM. PROGRAMMING
AUTOMATIC SHOCK CYCLE
HOLDING LOW TEMP
-4 °F