AP120BC1000-3/ AP120BCF1300-3 Manual
37
MAINTENANCE AND CLEANING CLEANING THE CONDENSER
For correct and efficient operation of the blast chiller, it is necessary that the condenser be kept
clean so that air can circulate around it freely and come into contact with the whole of its surface.
Fig. 1
This operation (to be
performed every 30 days,
max.) can be accomplished
using a brush (non-metallic)
to remove all the dust and
dirt from the condenser fins.
Remove the finned grid to
gain access to the
condenser.
CLEANING THE STORAGE COMPARTMENT
Clean the inside of the storage com-
partment daily to avoid altering the taste
and aroma of the food.
Clean the inside, the grid supports and
the grids with a non-corrosive detergent
and then rinse thoroughly.
The storage compartment and its internal
components have been designed to aid
all cleaning operations.
Clean the outside surfaces regularly with
a detergent for stainless steel and dry
using a soft cloth.
Always defrost the unit (see manual).
DO NOT USE ABRASIVES, SOLVENTS
OR GLASS WOOL (Fig. 3).
Avoid using sharp implements and
abrasives, especially when cleaning the
evaporator (Fig. 2).
Fig. 3
Fig.2
NOTE: If additional refrigerant should be needed, be certain to use the correct type and amount
as shown on the nameplate.