Installation Instructions
4REVERSING THE HARDWARE
4.1Remove the base grille (if your refrigerator has one) by pulling it straight out.
4.2Move the bottom hinge bracket (and shim glued to it) and plastic washer from the right side to the left side.
Plastic | Plastic | |
Washer | ||
Washer | ||
|
Hinge |
|
|
| Hinge |
|
| |||
Bracket | ||||
|
|
|
| Bracket |
Models with a hinge bracket | Models with a hinge bracket | |||
that has 2 screw holes. | that has 4 screw holes. | |||
|
|
|
| Switch the hinge pin to the |
|
|
|
| opposite side of the bracket. |
4.3Interchange hinge (and the shim glued to it) and screws at top right with screws at top left of cabinet.
Do not tighten screws on hinge side at this time.
Installing the hinge on the left. | Installing the hinge on the right. |
NOTES:
•Some hinges have four holes. Which holes you use for installing the hinge depends on which side you install the hinge.
•The outer edge of the hinge should be parallel to the edge of the case for correct installation.
4.4Transfer door stop
Move the metal door stop from the right end to the left end.
Door Stop
Left Side
4.5Transfer door stop (cont.)
Move any screws from the left end to the right end.
Right Side
19