Configuration and Installation
Using AXlink for data and power
Connect the Central Controller's AXlink connector to the
12 VDC PWR connector | PWR (+) |
on | GND |
| PWR(+) |
no connection
PWR
AXlink/RS232 connector | AXP/TX |
on | AXM/RX |
| GND |
FIG. 6 AXlink data and power wiring diagram
AXP
AXM GND
Axcess Control System
Using AXlink for data and a 12 VDC power supply
Connect the Central Controller's AXlink connector to the
12 VDC PWR connector | PWR (+) |
on | GND |
| PWR(+) |
AXlink/RS232 connector | AXP/TX |
on | AXM/RX |
| GND |
12 VDC power supply
PWR 
AXP
AXM | Axcess Control System |
| |
GND |
|
FIG. 7 AXlink and optional 12 VDC power supply wiring diagram
Use the 12 VDC power supply when the distance between the AMX system and
Using the AXlink-to-DB-9 connector cable for a PC system
To use a PC, set the internal jumpers for
The
DB-9 Wiring Pinouts
Pin | Signal | Function | Pin | Signal | Function |
|
|
|
|
|
|
1 | N/A | Not used | 6 | N/A | Not used |
|
|
|
|
|
|
2 | RXD | Receive data | 7 | RTS | Request to send (not used) |
|
|
|
|
|
|
3 | TXD | Transmit data | 8 | CTS | Clear to send (not used) |
|
|
|
|
|
|
4 | DTR | Data terminal ready (not used) | 9 | N/A | Not used |
|
|
|
|
|
|
5 | GND | Signal ground |
|
|
|
|
|
|
|
|
|
7 |
| |
|
|
|
