Installation
12 Mio Modero Device Family
Wallbox Mounting
1. Use the cutout dimension for the wallbox to cutout the install surface for the Mio Modero.
2. Confirm that the terminal end of the AxLink cable is disconnected, and not receiving power.
3. If the faceplate is connected to the mounting frame, place a flathead screwdriver in the notch at the
bottom right of the Mio Modero, and pry the faceplate from the mounting frame.
4. Connect the AxLink power supply. The connector passes through the center of the mounting frame
and connects to the board. The connection is illustrated in FIG. 2.
5. Place the mounting frame on the wallbox; align the screw holes with the mounting holes and fasten
the mounting frame to the wallbox using the screws supplied.
6. Attach the faceplate to the mounting frame first at the top and swing it to the bottom. See FIG.10.
FIG. 9 Mio Modero Double Style mounting dimensions
2.250
[57.2 MM]
[83.4 MM]
3.282
[50.8 MM]
2.000
Do not overtighten the screws when mounting the mounting frame. The device
should be flush with mounting surface.