AMX Device Family Sending Firmware to The Mio Modero Keypads

1 34

Programming The Mio Modero

26 Mio Modero Device Family

Sending Firmware to The Mio Modero Keypads

You need NetLinx studio to update firmware located on the Mio Modero Keypads. To send firmware to

the keypads:

1. Open NetLinx Studio.

2. Go to Tools > Firmware Transfers > Send to Axcess Device... This opens the Send to Axcess

Dialog Window .

3. Browse to the location of the firmware file.

4. Select the file within the Files frame.

5. Click Query for Devices.

6. Select the Mio Modero Keypad within the Devices frame.

7. Click Send and then Close.

8. Upon confirmation of a successful send, you can exit NetLinx Studio.

FIG. 17 Send to Axcess Dialog Window

Contents

Main AMX Limited Warranty and Disclaimer Software License and Warranty Agreement Page Table of Contents Page Overview Specifications The Mio Modero device family keypad specifications are as follows: Specifications Available Color Schemes Mio Modero LCD Feature Fixed Menu System Proximity Detection "People Sensor" Page Installation 5 Mio Modero Device Family Installation FIG. 2 The basic front and rear components of the Mio Modero are as follows: Changing Buttons Page Setting The AxLink Device Number Wiring Wiring guidelines Connecting the Wiring AxLink Data and Power Connections Using AxLink for data with an auxiliary power supply Mounting Procedures Page Page Accent Frame Mio Modero IR Mio Modero IR Specifications Wiring and Installation Setting the AxLink Device Number 1. 2. 3. Wiring Guidelines AxLink Data and Power Connections Checking AxLink Status Mounting Procedure Page Page Programming The Mio Modero KeypadBuilder Recognized SEND_COMMANDs Page Page Page Page Sending Firmware to The Mio Modero Keypads