AMX Device Family Sendcommand Panel,FML-1,D,L,0, Sendcommand Panel, GLY-1&4,,2, Alignment, Prx-#

	Programming The Mio Modero
SEND_COMMANDs (Cont.)
^FML D L #	Sets a line of the display to a dynamic line with a level, and sets the level style
	Syntax:
	"'^FML-<variable text address range>,D,L,<Level Style>'"
	Variables:
	variable text address range = 1 - 4; the address range corresponds to the
	dynamic line number.
	D = Dynamic line type
	L = Level
	level style = 0 or 1 for level style type
	Example:
	SEND_COMMAND Panel,"'^FML-1,D,L,0'"
	Set line 1 to a Dynamic line with level and set style to 'Level Style 0’
^GLY	Set Glyph Character.
(LCD equipped only)	Syntax:
	"'^GLY-<variable text address range>,',<glyph number>"
	Variables:
	variable text address range = 1 - 4; the address range corresponds to the
	dynamic line number.
	glyph number = glyph text.
	Example:
	SEND_COMMAND Panel, "'^GLY-1&4,',2"
	Sets the second glyph character on dynamic lines 1 and 4 of the LCD button.
^JST-	Set text alignment using a numeric keypad layout for those buttons with a
(LCD equipped only)	defined address range
	Syntax:
	"'^JST-<variable text address range>,<new text
	alignment>'"
	Variable:
	variable text address range = 1 - 4; the address range corresponds to the
	dynamic line number.
	new text alignment = Value of 1 - 9 corresponds to the following locations:
	1, 4 or 7 = Left
	2, 5 or 8 = Center
	3, 6 or 9 = Right
	Example:
	SEND_COMMAND Panel,"'^JST-1.4,1'"
	Sets the text alignment to the left side on dynamic lines 1, 2, 3 and 4 of the
	LCD button
	Note: There is no vertical alignment.
^PRX-	Sets the sensitivity for the proximity sensor.
	Syntax:
	"'^PRX-#'"
	Variables:
	# = a value from 0 - 31.
	Example:
	SEND_COMMAND Panel,"'^PRX-15'"
	Sets the proximity sensor for the device to a level of approximately 50%.

Mio Modero Device Family 23