AMX none AXR-WAVES (or WAV-LNK) Group ID DIP Switch

18 Pre-Installation WAVE 2-Way Wireless Accessories and Adapters for Touch Panels
Figure 19 shows the AXR-WAVES GROUP ADDRESS DIP (or WAV-LNK) switch
and a quick reference for the DIP switch numbers and their values.
1
2
3
4
5
6
7
8
ON
GROUP
ADDRESS
DIP switch settings
Switch Value
1 1
2 2
3 4
4 8
5 16
6 32
7 64
8 128
AXR-WAVES (or WAV-LNK) Group ID DIP Switch
The four-position GROUP ID DIP switch sets the identification number to synchro-
nize communication between the wireless devices and AXR-WAVES. Each AXR-
WAVES must have a unique GROUP ID number. The maximum number of AXR-
WAVES you can connect to a Central Controller is 16. When a WAV-PK or WAV-
PKM falls within the device number range set on the AXR-WAVES GROUP
ADDRESS DIP switch, it must also be set to the same GROUP ID number. The
Group Address DIP switch setting on the WAV-LNK must be set identical to the
Group Address setting on the AXR-WAVES server.
For example, if the AXR-WAVES (or WAV-LNK) GROUP ADDRESS DIP switch is
set to 128 and the GROUP ID DIP switch is set to 1, the WAV-PK, WAV-PKM, or
WAV-LNK devices 128 through 143 must have their GROUP ID DIP switch set to 1.
If the AXR-WAVES GROUP ID number does not match the WAV-PK, WAV-PKMs,
or WAV-LNK GROUP ID, they will not communicate properly. Figure 20 shows a
GROUP ID DIP switch and a quick reference for the DIP switch numbers and their
values.
Figure 19
GROUP ADDRESS and DIP
switch settings quick reference
Note
The GROUP ID DIP switch
setting must be identical on the
server and the WavePack.