AMX none WAV-PM Power Module

44 Specifications WAVE 2-Way Wireless Accessories and Adapters for Touch Panels

WAV-PM Power Module

Figure 49 Shows the WAV-PM Power Module and Figure 50 shows the specifica-

tions.

WAV-PM specifications

Output voltage

Output current

Input voltage

Recommended power supply

Weight

Dimensions

Enclosure

Connectors

Options

12 VDC

3.0 AMP maximum

12 VDC

PS4.2 (4.2 A)

3.3 lbs (1.5 kg) with battery

1.5" x 5.5" x 9.5" (38 mm x 140 mm x 191 mm)

Metal with black matte finish

• One 2-pin PWR connector

• One 2-pin IN connector

• One 2-pin OUT connector

• 12 VDC power supply

• AC-RK Accessory Rack Kit

Figure 49

WAV-PM Power Module

Figure 50

WAV-PM specifications

Contents

Main Limited Warranty and Disclaimer Table of Contents Page Introduction Features Whats in this Manual Whats New AXR-WAVES WAV-PK WAV-PKM WAV-LNK WaveLink WAV-PM WaveLink power module Related Instruction Manuals Sample Product Application (rear panel) AXCESS CardFrame supply WAV-PK Page WAV-PK WAV-PKM WAV-LNK WaveLink Page Optional WAV-PM WaveLink Power Module Page Power management Batteries Safe handling and usage of the battery Standard Power Supply Optional WAV-CHG Fast-Cycle Battery Charger Page Pre-Installation Overview AXR-WAVES (or WAV-LNK) Group Address DIP Switch AXR-WAVES (or WAV-LNK) Group ID DIP Switch WAV-PK Group ID DIP switch WAV-PKM Group ID DIP switch Battery Charging WAV-PM WaveLink Power Module Page Installation Overview Installing the Control System Wiring the AXR-WAVES Guidelines Preparing captive wires Connecting AXlink for data and power Installing the WAV-PK WAV-PK Battery Replacement Replace the WAV-PK battery (Figure 29) as follows. 1. Remove the battery cover by pressing outward on each of the battery cover re- lease tabs while lifting upward and backward at the same time. 2. Grasp the battery and lift it from the battery compartment. Then, pull the bat- Installing the WAV-PKM WAV-PKM Battery Replacement Page Installing the WAV-PM Single WAV-PM module When using a single WAV-PM to power a WAV-LNK, see Figure 34 for connections. Multiple WAV-PM modules Firmware Upgrades Overview AXR-WAVES Server Firmware WAV-PK Battery Pack Firmware Page WAV-PKM Battery Pack Page Page Specifications AXR-WAVES Figure 39 shows the AXR-WAVES. The specifications are in Figure 40. WAV-PK Figure 41 shows the WAV-PK. The specifications are in Figure 42. WAV-PKM Figure 43 shows the WAV-PKM. The specifications are in Figure 44. WAV-BP and WAV-BPM Batteries - WAV-LNK WaveLink Figure 47 shows the WAV-LNK transceiver and Figure 48 shows the specifications. WAV-PM Power Module Figure 49 Shows the WAV-PM Power Module and Figure 50 shows the specifica- tions. Contacting Sales and Technical Support Overview U.S. Sales and Technical Support Teams Panja International Offices Technical Support