AMX ViewStat manual Network Override Set-Up, Thermostat Button Lockout

Set Up and Configuration

Network Override Set-Up

This enables or disables the Network Override feature. When Network Override has been invoked the thermostat will only respond to the buttons of the thermostat; commands sent by the automation system are ignored.

Pressing the Enter button activates Network Override. However, you can disable this feature if you don’t want users to be able to activate Network Override. Enabling and Disabling of this feature is done through Thermostat Set-Up (FIG. 33).

Network Override		Enable Network
Set Up	Next	Override	Next

Disable Network

Override Back

FIG. 33 Network Override set-up

Net.Ovrd.Enabled

EXIT

Net.Ovrd.Disable

EXIT

MAIN MENU

MAIN MENU

Thermostat Button Lockout

This feature partially or completely disables the buttons of the thermostat. For example, the MODE and FAN status can be set and then locked, so the buttons will not allow those settings to be changed. Additionally, this can be set to allow changes for a limited time and amount of change. For example, you can limit temperature changes to ±3°, if desired (FIG. 34).

Thermostat

Lockout More

Complete

Lockout Next

Partial

Lockout More

Unlock

Thermostat More

EXIT

Back

SetPoints, Fan &

Mode Locked Out

Set Time Limit

min.

Set Temp. Limit

+

-

Allow SetPoint

Changes? Timed

Time+ Val

-

Yes

No

Allow Fan

Changes? Yes

Timed

No

Allow Mode

Changes? Yes

Timed

No

EXIT

Back

FIG. 34 Thermostat Button Lockout

40 ViewStat Communicating Thermostat