Analog Devices ADSP-BF538F system manual Jumper and Switch Settings, Jtag Emulation Port

ADSP-BF538F EZ-KIT Lite Hardware Reference

JTAG Emulation Port

The JTAG emulation port allows an emulator to access the processor’s internal and external memory through a 6-pin interface. The JTAG emu- lation port of the processor connects also to the USB debugging interface. When an emulator connects to the board at ZP4, the USB debugging interface is disabled. See “JTAG Connector (ZP4)” on page 2-23for more information about the connector.

To learn more about available emulators, contact Analog Devices (see “Processor Product Information”).

Jumper and Switch Settings

The jumper and switch locations are shown in Figure 2-2.

Figure 2-2. Jumper and Switch Locations

ADSP-BF538F EZ-KIT Lite Evaluation System Manual 2-9