Fujitsu 5000 user manual Point, Click Standard setting and Next, Click Next

5Fill out [Computer name], [Administrator password], and [Reenter password], and click [Next].

[Setting up network] appears.

To set up the network, ask your network administrator to check the setup after completing the setup, and set it up for your operating environment.

6Click [Standard setting] and [Next].

￿Point

With [Standard setting], the following network components are installed.

●Microsoft Network Client

●Microsoft Network File and Printer Share

●Internet Protocol (TCP/IP)

[Work group or domain name] appears.

7Click [This computer is not on the network, or it is connected to the network without domain], and click [Next].

[Windows 2000 has been successfully installed] appears.

8Click [Restart], or wait 15 seconds to restart the computer. [Starting the Network Identification Wizard] appears.

￿Important

Do not click [Back] on this screen.

To correct the setting, complete the setup, and then correct the setting.

9Click [Next].

[Computer user] appears.

10Click [User for this computer...] and [Next].

24