Fujitsu 5000 Setting Up Windows Point, Click Perform, Click OK. The PC restarts, Click Next

￿Important

You need to perform [Run this] to finalize the setup. Be sure to perform the procedure as it is described here.

12Click [Perform].

Final setup is performed, and the restart message is displayed.

13Click [OK]. The PC restarts.

You have completed the Windows setup.

■Setting Up Windows 2000

￿Point

While setting up Windows 2000, you will see a message "The file "xxxxx.xxx" is required from the Windows 2000 Professional CD-ROM" (where "xxxxx.xxx" is replaced with a file name such as "courf.fon"). In this case, enter "c:\support\i386" in the [Copy from] field, and press [OK] to start the setup.

After completing the setup, install Windows 2000 Service Pack2.

1Turn on the computer.

After a few seconds, [Starting the Windows 2000 Setup Wizard] is displayed.

2Click [Next].

[License Agreement] is displayed.

This License Agreement describes the agreement for using preinstalled Windows on the computer.

3Read the [License Agreement] carefully, and click [I agree], and then [Next].

￿Point

If you select [I do not agree], click [Next] and follow the instruction message.

4Enter [Name] and [Organization] and click [Next]. You can skip [Organization].

[Computer name and administrator password] is displayed.

23