Motherboard

1CPU

2DIMM slots

Memory modules are inserted into these slots.

Increasing the memory capacity increases the amount of data that the system can read at one access, thereby improving the processing capability of the PC.

When viewed from the front of the PC unit, the front slot is DIMM1 and the behind is DIMM2. The standard memory module is seated in the DIMM1 slot.

3Secondary IDE connector (IDE2)

The standard CD-ROM drive is connected.

4Floppy disk drive connector (FDD)

5Primary IDE connector (IDE1)

The standard hard disk drive is connected.

6Internal battery

This battery provides the power to retain information on date and time, and settings made in BIOS Setup.The life is about 5 years under normal use.

7

Page 21
Image 21
Fujitsu 5000 user manual Motherboard, Dimm slots, Secondary IDE connector IDE2, Internal battery