Fujitsu 5000 viii, Command entry keying in, diskcopy a a, Representation of continuous operation

Command entry (keying in)

In this manual, a command entry is represented as follows:

diskcopy a: a:

↑ ↑

•Where character spacing is provided as shown by [↑], press the [Space] key once.

Commands, an example of which is given above in lowercase, can also be entered in uppercase.

•[CD-ROM drive] indicates the name of the CD-ROM drive being used. Enter the drive name in accordance with your PC environment.

[CD-ROM drive]:\setup.exe

Screenshot example and illustrations

The screenshots and illustrations given in this manual are examples. The screenshots and file names may be different from those actually shown on your PC and the illustrations may be different from the actual appearance. For the explanatory purpose, illustration used in this manual may omit cables connected on the actual PC.

Representation of continuous operation

Continuous operation steps are represented in this manual by combining them with a “•••• ” sign as

shown below:

Example: Sequential operation of clicking the [Start] button, pointing [Program], then clicking

[Accessories]

↓

Click the [Start] button → [Program] → [Accessories].

Representation for BIOS Setup

When the BIOS Setup procedure is explained in this manual, a menu, submenu, and item may be represented by combining them with a hyphen as shown below:

Example: Set the [Serial Port 1] in [Advanced] to [Disable].

↓

[Advanced] - [Serial Port 1]: Disable

Floppy disk and CD-ROM drives

Users of a model without a floppy or CD-ROM drive should use a separately available drive for operation with a necessary drive.

For operation of peripheral devices, refer to the relevant manuals.

viii