Fujitsu 5000 Insert the expansion card into the slot, Install the expansion card mounting bracket

5Insert the expansion card into the slot.

Insert the expansion card into the slot, and secure it with the screw removed in Procedure 4.

6Install the expansion card mounting bracket.

Secure it with the four screws you have removed in Procedure 3.

7Reinstall the upper cover.

￿Point

To remove the expansion card, use the installation procedure in the reverse order.

8Plug the PC.

9Turn on the PC.

The system configures the device driver and resource to enable the expansion card.

￿Point

•The device drivers automatically selected by the Plug & Play functions are those included in the Windows XP/2000. Device drivers for some of expansion cards and peripherals are not included. If so, use a CD-ROM containing the device driver supplied with the expansion card and install it by following the messages.For more information, refer to the manual provided with the expansion card and peripherals.

•Before using the installed expansion card, use Device Manager to check whether the device driver is installed.If not, delete the device driver and then reboot the Windows XP/2000.

52