Fujitsu 5000 user manual CDs, Guidelines for CD Media

2 CDs

This section describes how to handle, insert, and remove a CD.

￿Notes on Handling

Follow the following guidelines to prevent faults when handling a CD.

Guidelines for CD Media

●Apply no label to any side of the disk. Do not use a ballpoint pen or pencil.

●Do not touch or damage the data side.

●Do not bend the disk or put a heavy object on it.

●If the disk has dirt or water droplets, use a damp cloth to wipe them off and clean the disk with a dry cloth. Always wipe the disk along the radius.

●Keep the disks dry.

●Do not place the disks in an extreme temperature environment.

●Do not place the disks in a humid and dusty environment.

Notes on Using the Drive

●Do not use the CD, if it is not safeguarded according to “Handling guidelines for CD media” above, or it has bends, cracks, or fissures. Otherwise, a fault may occur. The warranty is not applied to any failure caused by the use of such CDs.

●This PC accepts only round CDs. Do not use odd-shaped CDs. Otherwise, a fault may occur. The warranty is not applied to any failure caused by the use of CD in a variant shape.

●Use of a commercially available CD-ROM drive cleaning disk may put dusts on the lens. Do not use a CD-ROM drive cleaning disk.

￿Point

•A CD-ROM is the same as a music CD (compact disc) except it has computer information (characters) instead of sound. ROM stands for Read Only Memory. This PC can read data from CD-ROMs but cannot write data, except when CD-R/RW is selected .

•This PC accepts any CD that has one of the following marks. Do not use the CD if it does not carry any of them. Or, it may cause a failure. An additional application may be necessary to use particular types of CDs.

*1 You can write on the CD if you have a CD-R/RW drive.

*2 If you write data at 8X speed or higher, you need to have a high speed-ready drive.

32