Chapter 1 : INTRODUCTION (continued)

BROAD SCAN (HD/SDI)

1-11. BROAD SCAN (BSC730) REAR PANEL DESCRIPTION

O / I:

AC power switch (O = OFF, I = ON).

POWER:

Standard IEC connector (100-250 VAC, 0.5A, 50-60Hz automatic).

RS-232:

RS-232 communication port on a DB9 female connector.

IP/LAN:

Ethernet communication port on a RJ45 connector (optional).

COMPUTER INPUT & MONITOR

RGB INPUT:

Analog computer input on HD15 female connector.

RGB MONITOR OUT:

Analog computer output (loop-through) on HD15 female connector.

DVI-D INPUT:

Digital computer input on DVI-D female connector.

DVI-D MONITOR OUT: Digital computer output (loop-through) on DVI-D female connector.

ANALOG GENLOCK

 

INPUT:

Analog GENLOCK input (Black burst signals).

LOOP OUT:

GENLOCK output (loop-through).

VIDEO OUTPUTS

 

PAL/NTSC:

Composite video output (on 1 BNC connector).

LUMA KEY:

Luma key video output (on a BNC connector).

FRAME LOCK:

Frame lock output (on a BNC connector). This output allows synchronizing external

 

frame rate such as some graphic card.

S.VIDEO:

S.VIDEO output (4-pin mini DIN connector).

R, G, B, S:

RGB/S or RGsB video outputs (on 3 or 4 BNC connectors).

Cr, Y, Cb:

Component video (SD-YUV) output (on 3 BNC connectors).

PAGE 14