Chapter 7 : TECHNICAL SPECIFICATIONS (continued)

BROAD SCAN (HD/SDI)

7-2. VIDEO OUTPUTS (continued)

•SDI LUMA KEY*

Connector:

BNC female (x2).

Format:

Same format as the output.

Impedance:

75 Ohm.

•HD-SDI LUMA KEY (available on BHD930 models only)

Connector:

BNC female (x2).

Format:

Same format as the output.

Impedance:

75 Ohm.

* Available on the BSD830 & BHD930 models only.

7-3. ANALOG GENLOCK (MODELS: BHD930-AG, BSD830-AG & BSC730)

Connectors:

2 BNC female.

Input signal type:

Black Burst (PAL or NTSC) or 3-level HD black.

Impedance:

75 Ohm.

Output:

Active loop-through.

7-4. DIGITAL GENLOCK (MODELS: BHD930-DG & BSD830-DG)

Connectors:

2 BNC female.

Input signal type:

SD/HD-SDI Black.

Impedance:

75 Ohm.

Output:

Active loop-through.

7-5. COMMUNICATION PORTS

• RS-232

 

 

 

 

 

 

 

 

 

 

 

 

Connector:

DB9 female.

 

 

 

 

 

 

 

Data Rate:

9600 Bauds, 8 data bits, 1 stop bit, no parity bit, and no flow control.

 

 

 

Pin-out:

 

 

 

 

 

 

 

 

 

 

 

 

 

PIN #

 

 

 

FUNCTIONS

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2

 

 

Tx (transmit data to the control device)

 

 

 

 

 

 

 

3

 

 

Rx (receive data from the control device)

 

 

 

 

 

 

5

 

 

GROUND (Gnd)

 

 

 

DB9 connector

 

 

 

8

 

 

Reserved for manufacturer.

 

 

 

 

 

• LAN (Optional)

 

 

 

 

 

 

 

 

 

 

 

 

Connector:

RJ-45 female.

 

 

 

 

 

 

 

Protocol:

TCP (Transmission Control Protocol)

 

 

 

 

 

 

UDP (User Datagram Protocol).

 

 

 

 

 

Data Rate:

10 / 100 Mbps.

 

 

 

 

 

 

 

LED functions (on RJ45 connector):

 

 

 

 

 

 

 

Left LED

 

Right LED

 

Meaning

 

 

 

 

 

 

OFF

 

OFF

 

No link

 

 

 

 

 

 

OFF

 

ON

 

100 BASE-T link.

 

 

 

 

 

 

ON

 

OFF

 

10 BASE-T link.

PAGE 36