BROAD SCAN (HD/SDI)

Chapter 4 : FRONT PANEL DISPLAY MENU DESCRIPTION

4-1. INTRODUCTION

The front panel display menu presents 2 modes: the STATUS MODE and the CONTROL MODE.

•The STATUS MODE indicates the input and output status of the device.

•The CONTROL MODE allows selecting and adjusting the parameters of the device.

4-2. CONTROL BUTTONS

The front panel display is controlled by 2 buttons and 1 knob:

knob:

• In the CONTROL MODE, turn this knob to scroll thru the different menus.

ENTER button: • From the STATUS MODE, press this button to enter in the CONTROL MODE.

•From the CONTROL MODE, press this button to confirm a selected item.

EXIT / MENU button: • From the STATUS MODE, press this button to enter in the CONTROL MODE.

•From the CONTROL MODE, press this button to:

-return to the previous menu without safeguarding the selection.

-return to the STATUS MODE (press several times).

4-3. STATUS MODE

When switching ON, the front panel display shows the product's name and firmware versions as follows:

DEVICE MODEL

BHD930-AG

 

DEVICE STATUS

DEVICE VERSION

Version _._

 

 

 

 

 

 

 

 

 

 

 

 

 

Input :

SVGA

c

INPUT STATUS

 

H = 37.9K

V= 60 Hz

d

 

 

 

 

 

 

 

 

 

 

 

 

Output :

NTSC

e

OUTPUT STATUS

 

Internal

59.94

f

 

 

 

 

 

 

cINPUT FORMAT

dHORIZONTAL FREQUENCY (in kHz) / VERTICAL FREQUENCY (in Hz). e OUTPUT STANDARD.

f OUTPUT RATE TYPE / OUTPUT FREQUENCY

PAGE 19