Analog Devices SAFETY INSTRUCTIONS

ENGLISH

BROAD SCAN (HD/SDI)

SAFETY INSTRUCTIONS

All of the safety and operating instructions should be read before the product is operated and should be retained for further reference. Please follow all of the warnings on this product and its operating instructions.

CAUTION:
WARNING:	To prevent the risk of electric shock and fire, do not expose this device to rain, humidity or intense
	heat sources (such as heaters or direct sunlight). Slots and openings in the device are provided for
	ventilation and to avoid overheating. Make sure the device is never placed on or near a textile
	surface that could block the openings. Also keep away from excessive dust, vibrations and shocks.
POWER:	Only use the power supply indicated on the device or on the power source. Devices equipped with a
	grounding plug should only be used with a grounding type outlet. In no way should this grounding
	be modified, avoided or suppressed.

POWER CORD: Use the On (I) / Off (O) switch to power On or Off devices equipped with that switch. All other devices should be plugged and unplugged from wall outlet. In both cases, please follow these instructions:

-The power cord of the device should be unplugged from the outlet when left unused for several days.

-To unplug the device, do not pull on the power cord but always on the plug itself.

-The outlet should always be near the device and easily accessible.

-Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them.

If the power supply cord is damaged, unplug the device. Using the device with a damaged power supply cord may expose you to electric shocks or other hazards. Verify the condition of the power supply cords once in a while. Contact your dealer or service center for replacement if damaged.

CONNECTIONS: All inputs and outputs (except for the power input) are TBTS defined under EN60950.

SERVICING:	Do not attempt to service this product yourself by opening or removing covers and screws since it
	may expose you to electric shocks or other hazards. Refer all problems to qualified service
	personnel.
OPENINGS:	Never push objects of any kind into this product through the openings. If liquids have been spilled or
	objects have fallen into the device, unplug it immediately and have it checked by a qualified
	technician.

PAGE 2