BROAD SCAN (HD/SDI)

Chapter 5 : UPDATING THE DEVICE

The device can be updated thanks a computer (PC) via its RS-232 communication port or via its LAN communication port.

5-1. CONNECTIONS

cConnect the device to an AC power outlet.

dSwitch ON the device (REAR PANEL SWITCH = I).

eConnect the device to the computer used for the update via the desired communication port.

•For the RS232 communication port: Connect the RS232 connector of the device to the serial port of your computer with a DB9 M/F straight cable.

•For the LAN communication port: Connect the RJ45 connector of the device to your network according to your installation. Then with the front panel display menu configure the LAN communication port (CONTROL > LAN setup) and activate the LAN communication port (CONTROL > RS232/LAN port > LAN).

5-2. UPDATE INSTRUCTIONS

cSwitch ON the device.

dOpen the file: BroadScan Updater (in Start > Program > ANALOGWAY > BroadScan Updater).

eClick on the Port menu and select setup: the Communication setup window open.

-If you use the RS232 port: Select RS232 and the Com port connected to the device.

-If you use the LAN Port: Select UDP or TCP and select the communication parameters.

fClick on START on the software. The update will start.

gWhen the software displays: Program operation completed, click on the Quit button to close the update software. Your device is now ready to work.

NOTE: The updater files are available on our web site: http://www.analogway.com

PAGE 29