| QUICK START GUIDE – BROAD SCAN (HD/SDI) |
ANALOG WAY | EDITION : 07/07 |
CONNECTIONS:
cTurn OFF all of your equipment before connecting.
dConnect the AC power supply cord to the BROAD SCAN and to an AC power outlet.
eConnect your computer sources to the COMPUTER INPUT (HD15) connector or the
NOTE: The analog (RGB) MONITOR OUT is available only if the COMPUTER source is analog.
NOTE: The
gConnect your display device (TV monitor, VCR...) to the outputs (analog or SDI*).
hTurn ON the BROAD SCAN (rear panel switch). Then turn ON your input source and then your display devices. * The SDI outputs are available on BHD930 & BSD830 models only.
•Example of connection (Model:
6 | 4 | 4 | 5 |
|
5 5
2 | 3 |
|
•RGB/COMPONENT output connection:
SETTINGS:
cWe recommend resetting the (CONTROL default value
BROAD SCAN to all of its default values, with the front panel display menu yes) before proceeding.
d Select the
e Select the Input status menu (INPUT Input status) to verify the correct detection of the type and format of your input
source. If a wrong message is displayed, select manually the type of your input source (INPUT | Input Type). |
f Select the output format and rate (OUTPUT Format). |
|
g For SDTV output format (PAL, NTSC) select the type of the RGB/YCrCb output (OUTPUT | Type). |
h Perform the needed image adjustments, available in the IMAGE menu. |
|