Hardware and software requirements and tools needed
The Dry Contact I/O SmartSlot Card works with most APC by Schneider Electric UPS devices with an output rated less than or equal to 160kVA and an available SmartSlot.
While most devices meet this requirement; verify the compatibility of your device by locating it on the APC website, www.apc.com, and checking for compatible accessories.
You need the following tools:
•#1 Phillips screwdriver for screw terminals
•#2 Phillips screwdriver for SmartSlot screws
•a wrench of size 1" or 25.4 mm, or adjustable, to tighten the grommet
For the Configuration Utility, you need: Windows (XP, 2003, 2008, Vista, or 7) and Internet Explorer browser v7 or higher.
Dry Contact I/O SmartSlot Card | 3 |
