Item | Name |
| Description |
Universal I/O | These support the AP9335T/ TH and AP9810 dry | ||
| ports 1 and 2 | contact accessories | |
USB cable | Connecting this to your PC enables usage of the | ||
| connector | Configuration Utility. | |
Reset button | Use an appropriately sized, | ||
|
| press the Reset button. | |
|
| Holding the button for 5 seconds reboots the Card. | |
|
| Holding the button for 25 seconds resets the Card to | |
|
| the factory defaults. (The status light flashes green | |
|
| when you do this). | |
Status indicator | • | SOLID GREEN indicates communications and | |
|
| • | operations are fine |
|
| FLASHING GREEN indicates the Card is | |
|
| • | initializing |
|
| FLASHING RED indicates a communication fault | |
|
| • | SOLID RED indicates a |
Dip switches | These are located near the back of the front panel on | ||
|
| the | |
|
| switches” and “Configuring the Dip Switches” | |
|
| sections. | |
Output relay | Connections for alarm outputs. | ||
| terminals | See “Itemizing the input contact and output relay | |
|
| terminal blocks” and “Ratings for input contacts and | |
|
| output relays” . | |
Input contact | Connections for control inputs. | ||
| terminals | See “Itemizing the input contact and output relay | |
|
| terminal blocks” and “Ratings for input contacts and | |
|
| output relays” . | |
Cord grip | Supports the cabling that is used to control external | ||
|
| devices, or to connect up external switches. The | |
bare wires connect to the terminal blocks on the Card.
The cord grip is plastic and can secure a single cord with a diameter range of 5.8 – 10mm. This limits the number of conductors (inside the cord) and the power ratings.
Dry Contact I/O SmartSlot Card | 5 |
