Apple 2006 Connecting and Disconnecting iPod, Setting the Backlight Timer, Setting the Language

Models: 2006

1 72
Download 72 pages 59.63 Kb
Page 10
Image 10

10

Setting the Backlight Timer

You can set the backlight to turn on and illuminate the screen for a certain amount of time when you press a button or use the Click Wheel. The default is 10 seconds.

mChoose Settings > Backlight Timer, and then choose the time you want.

Even if you don’t set the backlight timer, you can turn on the backlight at any time by pressing any button or using the Click Wheel. After a few seconds, the backlight turns off.

Setting the Screen Brightness

You can adjust the brightness of your iPod screen by moving a slider.

mChoose Settings > Brightness, and then use the Click Wheel to move the slider. Moving it to the left dims the screen; moving it to the right increases the screen brightness.

You can also set the brightness during a slideshow or video by pressing the Center button to bring up and dismiss the brightness slider.

Setting the Language

iPod can be set to use different languages.

mChoose Settings > Language, and then choose a language from the list.

Connecting and Disconnecting iPod

You connect iPod to your computer to load music, videos, photos, and files, and to charge the battery. Disconnect iPod when you’re done.

Connecting iPod

To connect iPod to your computer:

mPlug the included iPod Dock Connector to USB 2.0 Cable into a high-power USB port on your computer (a USB 2.0 port is recommended), and then connect the other end to iPod.

If you have an iPod Dock, you can connect the cable to a high-power USB port on your computer, connect the other end to the Dock, and then put iPod in the Dock.

Chapter 1 iPod Basics

Page 10
Image 10
Apple 2006 Connecting and Disconnecting iPod, Setting the Backlight Timer, Setting the Screen Brightness, Connecting iPod