Document No: LT0122

F3200 Installation & Programming Manual

 

Programming System Configuration

MODE (CONTINUED)

 

Switches in additional pull up resistor to +22V in Alarm.

 

Suits detectors with high alarm current requirement or remote LED indicators.

 

(Refer to Appendix A2).

Mode 3

Low Current

 

680 Ohm pull up resistor to +22V supply.

 

10k EOL.

 

Suits high resistance, low current circuit e.g. sub-indicator panel monitoring.

Mode 4

Tamper

 

680 Ohm pull up resistor to +22V supply.

 

Requires EOL002Z active EOL.

 

Suits supervision of "tamper-protected" sprinkler valves.

Mode 5

Disabled

 

Current limit and pull up disabled.

 

No EOL required.

 

Suits unused AZCs (saves quiescent current).

7.2.4TIME DELAYS

The standard time delay on any change of state is 2.3 secs (2.0-2.6 secs) i.e. to Alarm, to Fault, to Normal. During this time the input conditions are continually read (and debounced). The input must be continuously in the new state for the duration of the time delay to cause a change of state.

There are two programmable time delays assigned to each circuit i.e. delay into alarm Delay 1 (D1) and delay out of alarm Delay 2 (D2). One, or both of these are also used to generate the other time delay types as follows, AVF = Alarm Verification, RAD = Return Air Detector, SAD = Supply Air Detector.

Note that the actual time delay also depends on the new condition (i.e. alarm or instant alarm). The operation of the SAD type was changed in V2.09 software.

Delay Type

Delay To Alarm

Delay to Normal

 

 

(applies to cct not zone)

1 Std

Inst Alarm 2.3

2.3

 

Alarm 2.3

2.3

2 AVF/RAD

Inst Alarm 2.3

2.3

 

Alarm (AVF/RAD sequence

2.3

 

using D1)

 

3 SAD

For V2.08 or earlier

 

 

Inst. Alarm 2.3

2.3

 

Alarm (AVF/RAD sequence

D2

 

Using D1)

 

 

For V2.09 or later

 

 

Inst. Alarm 2.3

2.3

 

If D1 is zero (default) the into

D2

 

Alarm time is 2.3 seconds

 

If D1 is non-zero the delay into

Alarm is AVF (using D1).

Issue 2.7

5 July 2001

Page 7-7

Page 108 Page 110
Page 109
Image 109
Tyco F3200 manual Mode, Time Delays, Avf/Rad, For V2.08 or earlier, For V2.09 or later
Page 108 Page 110

F3200 specifications

The Tyco F3200 series is a sophisticated fire alarm control panel designed for use in various commercial and industrial settings. Renowned for its reliability and ease of use, the Tyco F3200 stands out for its advanced features and state-of-the-art technology, making it a preferred choice for fire safety professionals.

One of the key features of the Tyco F3200 is its modular design, which allows for customization based on specific building requirements. This flexibility enables users to scale the system efficiently, with the capability to connect multiple panels in a network configuration. This adaptability is crucial for large facilities that require comprehensive coverage across expansive areas.

The F3200 utilizes a microprocessor-based control technology that ensures swift processing and response times. This technology enhances the panel's ability to monitor and manage alarms, alerts, and system status, ensuring that users receive real-time updates and notifications in the event of an emergency. The intuitive user interface, characterized by a clear display and user-friendly controls, simplifies the operation process, making it easier for staff to manage the fire alarm system effectively.

Additionally, the Tyco F3200 is compatible with various detection devices, including smoke detectors, heat detectors, and manual pull stations. This compatibility means that the system can be tailored to meet specific safety needs, accommodating a wide array of environments. Furthermore, the panel supports both conventional and addressable devices, providing flexibility in system design.

Another significant advantage of the Tyco F3200 is its advanced communication capabilities. The panel can integrate with various alarm transmission technologies, including RS-232 and RS-485 interfaces, allowing for seamless communication with remote monitoring stations. This feature enhances the reliability of emergency response efforts.

Moreover, the F3200 includes robust diagnostic and reporting tools that help maintenance personnel ensure the system's optimal performance. It provides comprehensive event logs and troubleshooting features, allowing for easy identification of issues and efficient maintenance procedures.

In summary, the Tyco F3200 is an advanced fire alarm control panel that integrates cutting-edge technology, flexibility, and user-friendliness. Its modular design, quick response time, compatibility with various devices, and strong communication capabilities make it an excellent choice for anyone seeking a dependable fire alarm system. Whether for small businesses or large-scale operations, the F3200 delivers essential fire safety solutions tailored to meet the diverse needs of its users.
Top Page Image Contents