Gen, Microvac and QE90 | Tyco F3200 guide

F3200 Installation & Programming Manual	Document No: LT0122
Installation & Wiring

T-GEN 50

The Vigilant T-GEN 50 is permanently powered, requiring a supervised Alarm- signal from the FIP rather than switched power. The BELLS- terminal can be used for this unchanged. Alternatively, an open collector output (if the T-GEN is in or adjacent to the F3200 panel), another Ancil relay on the MAF, or an 8RM relay can be used as per Section 3.5 of the T- GEN Installation Instructions, LT0186. Note that a 3k3 EOLR should be used for the BELLS relay, and is also suitable for the other ANCIL and Module relays.

MICROVAC AND QE90

The Anc 3/Bells output can be used to activate a Microvac/QE90 and to supervise the link for a fault condition. A 24V relay (e.g. PA0730 General Purpose Relay Bd) is required to be mounted within the Microvac/QE90, and the wiring as shown in Fig 8.5.4.

Alternatively the Anc 3/Bells output can be made voltage-free (remove Lks 2, 3, 4 on the MAF) and a spare 8 Zone Input can be used to supervise the Microvac/QE90. This arrangement, shown in Fig 8.5.5, does away with the relay, but requires a 4-wire connection and one spare input. The input should be programmed as a status-only zone and the fault state included in the logic equation to generate a Warning System fault. E.g. for zone 16 WSF = Z16F.

A high level link can be achieved between the F3200 and QE90 using the RZDU communications output. This is only suitable for when the F3200 and QE90 are co-located, as there is no duplication of the cable. Details for this wiring are contained in the QE90 Installation and Commissioning Manual LT0088. In addition, the QE90 needs to be supervised for a fault condition. This can be done as shown in Fig 8.5.5 using a spare zone input or as in 8.5.4 using the Ancil 3/Bells output supervision.

┌───────────┬───────────┬──────────┐

│		┌┴┐		┌┴┐	│
│		│ │		│ │	│
│		╘╤╛		╘╤╛	│
│		│		│	│
│	┌─┴─┐		┌─┴─┐		┌┴┐
│	│	│	│	│	│ │6k8
│	└─┬─┘		└─┬─┘		└┬┘
│		│		│	│

│┌─────┴───────────┴──────────┘

││

+o────────────┬───────────┴─────┼─────┬───────────┬──────────┐

		┌┴┐	│		┌┴┐		┌┴┐	│
		│ │DIODE	│		│ │		│ │	│
		╘╤╛	│		╘╤╛		╘╤╛	│
		│	│		│		│	│
ANCIL 3	┌─┴─┐		│	┌─┴─┐		┌─┴─┐		┌┴┐
BELLS	│	│	│	│	│	│	│	│ │6k8
	└─┬─┘		│	└─┬─┘		└─┬─┘		└┬┘
		│	│		│		│	│

-o────────────┴─────────────────┴─────┴───────────┴──────────┘

FIG 8.5.1

EXAMPLE OF WIRING WITH 2 SUPERVISED BRANCHES

FOR DEVICES WITH NO INTERNAL SERIES DIODE

Page 8-16

5 July 2001

Issue 2.7

F3200 specifications

The Tyco F3200 series is a sophisticated fire alarm control panel designed for use in various commercial and industrial settings. Renowned for its reliability and ease of use, the Tyco F3200 stands out for its advanced features and state-of-the-art technology, making it a preferred choice for fire safety professionals.

One of the key features of the Tyco F3200 is its modular design, which allows for customization based on specific building requirements. This flexibility enables users to scale the system efficiently, with the capability to connect multiple panels in a network configuration. This adaptability is crucial for large facilities that require comprehensive coverage across expansive areas.

The F3200 utilizes a microprocessor-based control technology that ensures swift processing and response times. This technology enhances the panel's ability to monitor and manage alarms, alerts, and system status, ensuring that users receive real-time updates and notifications in the event of an emergency. The intuitive user interface, characterized by a clear display and user-friendly controls, simplifies the operation process, making it easier for staff to manage the fire alarm system effectively.

Additionally, the Tyco F3200 is compatible with various detection devices, including smoke detectors, heat detectors, and manual pull stations. This compatibility means that the system can be tailored to meet specific safety needs, accommodating a wide array of environments. Furthermore, the panel supports both conventional and addressable devices, providing flexibility in system design.

Another significant advantage of the Tyco F3200 is its advanced communication capabilities. The panel can integrate with various alarm transmission technologies, including RS-232 and RS-485 interfaces, allowing for seamless communication with remote monitoring stations. This feature enhances the reliability of emergency response efforts.

Moreover, the F3200 includes robust diagnostic and reporting tools that help maintenance personnel ensure the system's optimal performance. It provides comprehensive event logs and troubleshooting features, allowing for easy identification of issues and efficient maintenance procedures.

In summary, the Tyco F3200 is an advanced fire alarm control panel that integrates cutting-edge technology, flexibility, and user-friendliness. Its modular design, quick response time, compatibility with various devices, and strong communication capabilities make it an excellent choice for anyone seeking a dependable fire alarm system. Whether for small businesses or large-scale operations, the F3200 delivers essential fire safety solutions tailored to meet the diverse needs of its users.

Tyco F3200 manual Gen, Microvac and QE90

Models: F3200

T-GEN 50

MICROVAC AND QE90

5 July 2001

F3200 specifications