F3200 Installation & Programming Manual

Document No: LT0122

Configuring a FIP

 

Suggest that two 12V, 10 Ahr sealed batteries from list in Section 3.3.3. would be adequate (or next size up, e.g. 17 Ahrs).

Note that these require a 68E, 10W battery test resistor to be fitted to the tabs on the MAF/PSU as described in Section 5.3.5.

5.3.4BATTERY SIZE

The maximum battery size given in the specification, Section 3.3.3, of 220mm x 220mm x 175mm, is imposed by the cardframe, which obstructs insertion and removal of batteries in the bottom of the cabinet.

The maximum sizes which fit within this size are:

Sonnenschein

A212/36A

36

AHr

Powersonic

PS-12400

40

Ahr

Yuasa

NP38-12

38 Ahr

Century Yuasa

PS-12400

40

Ahr

IRH BB Battery

BP40-12

40

Ahr

Panasonic

LC-X1242P(AP)

42

Ahr

YHZ Power

NP38-12

38 Ahr

If batteries larger than this are required, then the cardframe can be made removable by replacing the 3 pop rivets with M4 or M5 screws and nuts.

For an FP0550, or an FP0551 with a removable cardframe, the maximum allowable size is 220H x 260W x 175D.

The maximum sizes which fit within this restriction are:

Sonnenschein

A212/50A

50 Ahr

Powersonic

PS-12600

60 Ahr

Yuasa

NP38-12

38 Ahr

Fitting and removing batteries of this maximum size is difficult, and may require the removal of any modules or brackets fitted in the bottom of the cabinet.

These very large size batteries may also impede the plugging in and removal of modules fitted to the bottom position of the cardframe.

Battery Combinations

Large capacity batteries can be made up of two parallel sets of 24V batteries of smaller capacities. This allows easier fitting, and allows larger capacities, and a greater range of capacity, to be achieved than is possible with a single pair (as indicated above).

Examples of combinations that will fit in an FP0551 with no cardframe removal required.

1.2 Powersonic PS-12330 (33 Ahr) batteries in parallel with 2 Powersonic PS-12100 (10 Ahr) batteries gives a total of 43 Ahr.

2.2 sets of 2 Powersonic PS-12280 (28 Ahr) will provide 56Ahr and will fit side by side on the bottom of an FP0551.

Page 5-6

5 July 2001

Issue 2.7

Page 59 Page 61
Page 60
Image 60
Tyco F3200 manual Battery Size
Page 59 Page 61

F3200 specifications

The Tyco F3200 series is a sophisticated fire alarm control panel designed for use in various commercial and industrial settings. Renowned for its reliability and ease of use, the Tyco F3200 stands out for its advanced features and state-of-the-art technology, making it a preferred choice for fire safety professionals.

One of the key features of the Tyco F3200 is its modular design, which allows for customization based on specific building requirements. This flexibility enables users to scale the system efficiently, with the capability to connect multiple panels in a network configuration. This adaptability is crucial for large facilities that require comprehensive coverage across expansive areas.

The F3200 utilizes a microprocessor-based control technology that ensures swift processing and response times. This technology enhances the panel's ability to monitor and manage alarms, alerts, and system status, ensuring that users receive real-time updates and notifications in the event of an emergency. The intuitive user interface, characterized by a clear display and user-friendly controls, simplifies the operation process, making it easier for staff to manage the fire alarm system effectively.

Additionally, the Tyco F3200 is compatible with various detection devices, including smoke detectors, heat detectors, and manual pull stations. This compatibility means that the system can be tailored to meet specific safety needs, accommodating a wide array of environments. Furthermore, the panel supports both conventional and addressable devices, providing flexibility in system design.

Another significant advantage of the Tyco F3200 is its advanced communication capabilities. The panel can integrate with various alarm transmission technologies, including RS-232 and RS-485 interfaces, allowing for seamless communication with remote monitoring stations. This feature enhances the reliability of emergency response efforts.

Moreover, the F3200 includes robust diagnostic and reporting tools that help maintenance personnel ensure the system's optimal performance. It provides comprehensive event logs and troubleshooting features, allowing for easy identification of issues and efficient maintenance procedures.

In summary, the Tyco F3200 is an advanced fire alarm control panel that integrates cutting-edge technology, flexibility, and user-friendliness. Its modular design, quick response time, compatibility with various devices, and strong communication capabilities make it an excellent choice for anyone seeking a dependable fire alarm system. Whether for small businesses or large-scale operations, the F3200 delivers essential fire safety solutions tailored to meet the diverse needs of its users.
Top Page Image Contents