Tyco F3200 guide

Document No: LT0122	F3200 Installation & Programming Manual
	Configuring a FIP

5.3.3EXAMPLE BATTERY/CHARGER CALCULATIONS An example FP0551 FIP has the following configuration:

3 8ZMs total (i.e. 2 x FP0553 expansion modules fitted)

1 8RM fitted

20 AZCs enabled, 4 disabled

42mA total detector current on the 20 AZCs 350mA of door holders off +VNBF

5 relays on the 8RM used, with supervision enabled, all switching 24V, 50mA relays, normally de-energised.

Ancillary relay 1 (on the MAF) switching a 24V, 100mA load A Bell circuit with 0.75A of 24V bell load.

Calculate the required battery capacity and check the power supply load.

Steps

1.The quiescent load (Iq) for the mains fail situation is: 130mA (FIP including one 8ZM)

+82mA (second 8ZM, all AZCs enabled)

+4mA (third 8ZM, basic current only)

+4 x 10mA (third 8ZM, current for 4 AZCs)

+42mA (detector current)

+6mA (8RM, supervision enabled)

304mA

Say Iq = 0.30A for mains off.

The quiescent load for mains on is Iq plus the door holders (In = 0.35A) i.e. 0.65A.

2.Say, for example, that the 2 zones in alarm can, at most, turn on 3 of the 5 module relays plus all the bells and the Anc 1 load.

The alarm load for 2 zones in alarm is therefore:

275mA (FIP including 1 8ZM, 2 zone alarm, MAF relays)

+82mA (second 8ZM, quiescent only)

+44mA (third 8ZM, quiescent only)

+42mA (detector current)

+6mA (basic 8RM current)

+3 x 11mA (3 relays on 8RM)

+3 x 50mA (loads on 3 relays)

+100mA (Ancillary 1 relay load)

+750mA (Bells load)

1482mA

Say Ia = 1.48A (the door holders are switched off in alarm).

3.Cap (5 hr) = 5 x 0.3 + 0.66 x 1.48 Ahr = 2.49 Ahr

4.Battery charger current required is:

Ia (1.48A) is greater than Iq + In, (0.65A), therefore:

Ic = 1.48A + (2.49/24) x 1.25 = 1.61A (where the 1.25 allows for charging efficiency e of 0.8) i.e. 3A is sufficient.

5.Battery capacity

Cap (24 hr) = [(24 x 0.3) + 0.66 x 1.48] x 1.25 = 10.2Ah.

Issue 2.7

5 July 2001

Page 5-5

F3200 specifications

The Tyco F3200 series is a sophisticated fire alarm control panel designed for use in various commercial and industrial settings. Renowned for its reliability and ease of use, the Tyco F3200 stands out for its advanced features and state-of-the-art technology, making it a preferred choice for fire safety professionals.

One of the key features of the Tyco F3200 is its modular design, which allows for customization based on specific building requirements. This flexibility enables users to scale the system efficiently, with the capability to connect multiple panels in a network configuration. This adaptability is crucial for large facilities that require comprehensive coverage across expansive areas.

The F3200 utilizes a microprocessor-based control technology that ensures swift processing and response times. This technology enhances the panel's ability to monitor and manage alarms, alerts, and system status, ensuring that users receive real-time updates and notifications in the event of an emergency. The intuitive user interface, characterized by a clear display and user-friendly controls, simplifies the operation process, making it easier for staff to manage the fire alarm system effectively.

Additionally, the Tyco F3200 is compatible with various detection devices, including smoke detectors, heat detectors, and manual pull stations. This compatibility means that the system can be tailored to meet specific safety needs, accommodating a wide array of environments. Furthermore, the panel supports both conventional and addressable devices, providing flexibility in system design.

Another significant advantage of the Tyco F3200 is its advanced communication capabilities. The panel can integrate with various alarm transmission technologies, including RS-232 and RS-485 interfaces, allowing for seamless communication with remote monitoring stations. This feature enhances the reliability of emergency response efforts.

Moreover, the F3200 includes robust diagnostic and reporting tools that help maintenance personnel ensure the system's optimal performance. It provides comprehensive event logs and troubleshooting features, allowing for easy identification of issues and efficient maintenance procedures.

In summary, the Tyco F3200 is an advanced fire alarm control panel that integrates cutting-edge technology, flexibility, and user-friendliness. Its modular design, quick response time, compatibility with various devices, and strong communication capabilities make it an excellent choice for anyone seeking a dependable fire alarm system. Whether for small businesses or large-scale operations, the F3200 delivers essential fire safety solutions tailored to meet the diverse needs of its users.

Tyco F3200 manual

Models: F3200

F3200 specifications