Apple 2008 manual Setting Up Your Display

Setting Up Your Display

Follow these steps to set up your Apple LED Cinema Display:

1Remove the protective film from the display and cables.

2Insert the power cord into the display, and then insert the AC plug into a grounded power outlet.

3Connect the Mini DisplayPort cable to your computer, as shown below.

Apple LED Cinema Display

Mac portable	Power
	outlet
MagSafe USB	Mini
	DisplayPort

4Connect the USB cable to your computer to use the display’s built-in iSight camera, speakers, microphone, and USB ports.

5Plug the MagSafe connector into the MagSafe power port on your computer to charge the battery and provide power to your computer.

6Press the power button on your computer to start it up. The display turns on automatically when you start up your computer.

8

English