Take Apart | Chassis Harness Assembly - 37 | |
1 | Disconnect the speaker wire spade connector from the |
|
| back of the speaker. | |
2 | Remove the Phillips screws from the front of the | |
| speaker. | |
Replacement Note: Detach the replacement speaker from its wires and connect the replacement speaker to the original speaker wires.
Speaker Wires
Note: The speaker wire connectors are very fragile.
1Look down on the chassis cable bridge and locate the notches in the cable bridge on top of the wire connectors.
2Using a jeweler's screwdriver, very gently press down on the tab in the middle of the wire connector. You will feel or hear a snap.
