Take Apart | Chassis Harness Assembly - 46 |
3 | Route the floppy drive cable through its opening at the | |
| back of the floppy drive bay. |
4 | Carefully route the analog and CD-ROM/hard drive |
| cables through the large opening behind the CD-ROM |
| drive bay |
5 | Turn over the chassis so that the top is up and the |
| speakers are at the front, facing you. |
Important: Be sure to reconnect the CD-ROM, hard drive, and analog connectors in the proper order. When you position the CD-ROM, hard drive, and analog connectors, be sure that the power cables are placed toward the outside of the chassis and the data ribbon cables are placed toward the inside of the chassis.
6 Locate the CD-ROM, hard drive, and analog connectors. 7 Position the CD-ROM connector with the connector slot
