Apple 8500 Series, 8500/150 Series appendix Chapter

mTurn off the computer. If the disk isn’t ejected, then hold down the button on your mouse or other pointing device while you turn the computer on again.

mLocate the small hole near the disk drive’s opening, and carefully insert the end of a large straightened paper clip into it. Push gently until the disk is ejected. Do not use excessive force.

If none of these solutions works, take the computer or disk drive to your Apple-authorized service provider to have the disk removed.

You installed a CD-ROM drive after you bought your computer and your computer won’t restart after you’ve copied software for your CD-ROM drive to the System Folder.

mIf you attempt to install software for your CD-ROM drive without using the Installer, you may not be able to restart your computer. Restart the computer while holding down the Shift key (to turn off system extensions) and then remove any CD-ROM software files you copied by dragging them to the Trash. Reinstall the software according to the instructions that came with the drive.

If this procedure doesn’t solve the problem, restart your computer using the Disk Tools floppy disk or the CD-ROM disc containing system software that came with your computer. (For instructions on starting your computer using a floppy disk, see “Starting Up From a Floppy Disk” later in this chapter.)

Your computer won’t restart, and a CD-ROM disc is in the CD-ROM drive.

mYour computer may be trying to start up from the CD-ROM disc. Press the Open/Close button of your CD-ROM drive to open the tray and remove the CD-ROM disc. Close the tray, then restart your computer.

90Chapter 6