2Attach one end of the video cable to the Video In port on the VCR.

Follow the directions that came with the VCR.

3Plug the other end of the video cable into either the S-video output port (Æ) or the composite video output port (Â) on the Macintosh.

If the connector doesn’t slide easily into the port, realign it and try again. Don’t use force, which could damage the computer or cable.

4Plug the dual RCA plugs on the audio cable into the left and right Audio In ports on the VCR.

5Plug the RCA connectors on the audio cable into the left and right audio input ports (-) on the Macintosh.

Depending on whether your equipment has S-video or composite video (RCA-type) ports, your finished connections should look like one of the following:

S-video connection for output from the computer

S-video output

- Audio output

port

ports

 

(left and right)

S-video In

Audio In ports

port

(left and right)

S-video cable

Dual RCA-plug cable

VCR

(available at most electronics supply stores)

Connecting Additional Equipment

55

Page 55
Image 55
Apple 8500/150 Series appendix Follow the directions that came with the VCR, Video connection for output from the computer