|
| Troubleshooting |
| Symptom Charts/System - 9 | |
|
|
| 1 | Verify system software is version 7.5.2 or later (Power |
|
System | |||||
intermittently |
| Macintosh 9500/120 and 9500/132) or 7.5.3 or later | |||
crashes or hangs | 2 | (Power Macintosh 9500/150). | |||
|
|
| Verify DIMMs are noncomposite. | ||
|
|
| 3 | Verify software is | |
|
|
| 4 | system software. | |
|
|
| Verify software is Power Macintosh 9500 compatible | ||
|
|
|
| (contact developer). Also, try booting with extensions off to | |
|
|
| 5 | determine if there are system init problems. | |
|
|
| Clear parameter RAM. Hold down <Command> <Option> <P> | ||
|
|
|
| <R> during startup but before "Welcome to Macintosh" | |
|
|
| 6 | appears. | |
|
|
| Remove all DRAM DIMMs and try replacing them one at a | ||
|
|
| 7 | time to test. Replace any bad DIMMs. | |
|
|
| Replace processor card. | ||
|
|
| 8 | Replace logic board. Retain DIMMs. Note: When you replace | |
|
|
|
| the logic board, be sure the LED cable is not interfering with | |
|
|
|
| the power actuator. | |
