TroubleshootingSymptom Charts/Hard Drive - 17
Hard Drive
Single internal hard | 1 | Replace hard drive power cable. |
drive does not | 2 | Replace hard drive. If problem resolved, reinstall SCSI |
operate; drive | 3 | device driver and system software. |
doesn’t spin | Replace power supply. | |
No internal SCSI | 1 | Verify there are no duplicate SCSI device addresses. |
drives operate | 2 | Disconnect external SCSI devices and check for proper |
|
| termination. Only last device in SCSI chain should be |
| 3 | terminated. |
| Replace SCSI data cable. | |
| 4 | Replace power supply. |
| 5 | Replace processor card. |
| 6 | Replace logic board. Retain customer's DIMMs. Note: When |
|
| you replace the logic board, be sure the LED cable is not |
|
| interfering with the power actuator. |
