|
| Troubleshooting |
| Symptom Charts/System - 8 | |
|
| shuts down | 1 | Make sure air vents are clear. Thermal protection |
|
System | |||||
intermittently |
| circuitry may shut down system. After 30 to 40 minutes, | |||
|
|
| 2 | system should be OK. | |
|
|
| Make sure power cord is firmly plugged in. | ||
|
|
| 3 | Verify fan is plugged in and working. Replace if necessary. | |
|
|
| 4 | Replace power cord. | |
|
|
| 5 | Check battery. | |
|
|
| 6 | Reset Cuda chip. (Refer to The Cuda Chip in Basics for | |
|
|
| 7 | instructions.) | |
|
|
| Reset logic board. (Refer to Resetting the Logic Board in | ||
|
|
| 8 | Basics for instructions.) | |
|
|
| Replace power supply. | ||
|
|
| 9 | Replace processor card. | |
|
|
| 10 | Replace logic board. Retain customer's DIMMs. Note: When | |
|
|
|
| you replace the logic board, be sure the LED cable is not | |
|
|
|
| interfering with the power actuator. | |
