Apple EPR2320TM, DPR2320TM manual To install Windows 2000 drivers, To install Windows XP drivers

Models: DPR2320TM EPR2320TM

1 81
Download 81 pages 24.37 Kb
Page 18
Image 18

How Do I Install USB Drivers?

To install Windows 2000 drivers

1.Insert the USB Cable Modem Driver Installation Disk into the CD-ROM drive of your PC.

2.Wait until the Power and Cable indicators on the cable modem illuminate solid green.

3.Click Next in the Found New Hardware Wizard window.

4.Select Search for a suitable driver for my device (recommended) in the Found New Hardware Wizard window, and then click Next.

5.Select CD-ROM drives in the Found New Hardware Wizard window, and then click Next.

6.Click Next in the Found New Hardware Wizard window. The system searches for the driver file for your hardware device.

7.After the system finds the USB driver, the Digital Signature Not Found window opens and displays a confirmation message to continue the installation.

8.Click Yes to continue the installation. The Found New Hardware Wizard window reopens with a message that the installation is complete.

9.Click Finish to close the Found New Hardware Wizard window. The USB drivers are installed on your PC and your USB devices are ready for use.

10.Try to access the Internet. If you cannot access the Internet, go to Having Difficulty, later in this guide. If you still cannot access the Internet, contact your cable service provider for further assistance.

To install Windows XP drivers

1.Insert the USB Cable Modem Driver Installation Disk into the CD-ROM drive of your PC.

2.Wait until the Power and Cable indicators on the cable modem illuminate solid green.

3.Select Install from a list or specific location (Advanced) in the Found New Hardware Wizard window, and then click Next.

4.Select Search removable media (floppy, CD-ROM) in the Found New Hardware Wizard window, and then click Next.

5.Click Continue Anyway in the Hardware Installation window to continue the installation. The Found New Hardware Wizard window reopens with a message that the installation has finished.

6.Click Finish to close the Found New Hardware Wizard window. The USB drivers are installed on your PC and your USB devices are ready for use.

7.Try to access the Internet. If you cannot access the Internet, go to Having Difficulty, later in this guide. If you still cannot access the Internet, contact your cable service provider for further assistance.

17

Page 18
Image 18
Apple EPR2320TM, DPR2320TM manual To install Windows 2000 drivers, To install Windows XP drivers