Apple DPR2320TM, EPR2320TM manual Back Panel Description

WebSTAR DPR2320 and EPR2320 Gateway Cable Modems User’s Guide

Back Panel Description

The following illustration describes the back panel components of the DPR2320 and the EPR2320.

	ANTENNA
12 VDC	POWER
	RESET
ETHERNET
USB

CABLE

1

2

3

4

5

6

1ANTENNA— Provides a communication connection for the built-in wireless access point (WAP) to allow wireless devices to communicate with the cable modem

2POWER—Connects the cable modem to the DC output of the AC power adapter that is provided with your cable modem

CAUTION:

Avoid damage to your equipment. Only use the AC power adapter and power cord that is provided with your cable modem.

3RESET—Activating this switch resets the gateway to factory default values and reboots the cable modem

This switch is for maintenance purposes only.

Do not use unless directed to do so by your service provider.

4ETHERNET—RJ-45 Ethernet port connects to the Ethernet port on your PC or your home network

5USB—12 Mbps USB port connects to the USB port on your

PC

6CABLE—F-Connector connects to an active cable signal from your cable service provider

T10947

8