WebSTAR DPR2320 and EPR2320 Gateway Cable Modems User’s Guide
Configuring MAC Address Filters
Use the Setup Advanced Settings – MAC Filtering page to configure MAC address filters. These filters allow you to deny or block access to the Internet by the individual MAC addresses listed in the table. You can also prevent individual PCs from sending outgoing TCP/UDP traffic to the WAN using their MAC address.
If you are not familiar with the advanced settings detailed in this section, contact your cable service provider before you attempt to change any of the gateway cable modem default advanced MAC filtering settings.
Click MAC Address Filtering in the Advanced Settings section of the Setup page to access the Setup Advanced Settings – MAC Filtering page.
Setup Advanced Settings – MAC Filtering Page Example
The following illustration is an example of the Setup Advanced Settings – MAC
Filtering page.
48
