WebSTAR DPR2320 and EPR2320 Gateway Cable Modems User’s Guide

Configuring Your Wireless Access Point Parameters

Use the Setup Wireless – Basic page to configure your wireless access point (WAP) parameters, included SSID and channel number.

If you are not familiar with the advanced settings detailed in this section, contact your cable service provider before you attempt to change any of the gateway cable modem default wireless basic settings.

Click Basic in the Wireless section of the Setup page to access the Setup

Wireless – Basic page.

Setup Wireless – Basic Page Example

The following illustration is an example of the Setup Wireless – Basic page showing the factory default settings.

System Signal Status

Log

Setup

Setup

Wireless - Basic

This page allows you to configure your wireless access point parameters, including SSID and channel number.

Service Set Identifier (SSID)

Basic Service Set Identifier (BSSID)

Country:

New Channel:

WebSTAR

00:0a:73:9e:be:77

USA

1

Current Channel:

1

 

Encryption Mode:

No Encryption

Access Point:

On

Off

Apply

62

Page 63
Image 63
Apple DPR2320TM, EPR2320TM manual Configuring Your Wireless Access Point Parameters, Setup Wireless Basic Page Example