Apple G3 Minitower manual Connectors Notches

1To install a DRAM DIMM, align it in the DRAM slot as pictured and push the DIMM down until the ejectors snap into place.

Important Do not touch the DIMM’s connectors. Handle the DIMM only by the edges.

DRAM DIMM (Your DIMM’s shape and components may vary.)

Connectors	Notches	DRAM slot (1 of 3)
	Ribs (inside slot)

The DRAM DIMM is designed to fit into the slot only one way. Be sure to align the notches in the DIMM with the small ribs inside the slot. With the ejectors in the open position (as shown), push down on the DIMM until it snaps into place. The ejectors will automatically close.

Ejector (Your slot may have one or two ejectors. They should be pushed outward and down to be in the open position, as shown.)

To remove a DIMM, push down on each of the slot’s ejectors until they open and release the DIMM.

Installing PCI Cards, Memory, and Internal Storage Devices 59