Apple G3 Minitower manual Connecting a Television, Video Audio, Output port Output ports

Models: G3 Minitower

1 88
Download 88 pages 55.38 Kb
Page 30
Image 30

Connecting a Television

You can connect to your computer any television that has either an S-video or composite video input port and Audio In ports. The television displays a mirror image of the computer monitor display, and (if the television has speakers) plays the sounds generated by the computer. This capability is especially useful for giving presentations if you have a large- screen television.

To connect a television for TV mirroring, first you turn off the computer and connect the television to it. Then you use the Control Strip to turn on TV mirroring. (If you need to learn more about the Control Strip, see Mac OS Help, available in the Help menu.)

Because TV mirroring uses a limited number of resolutions supported by televisions, it works best with multisynchronous monitors that support many resolutions. If you are using a fixed- frequency monitor, the monitor display will be disabled when you turn on TV mirroring.

(Most newer monitors are multisynchronous; refer to the manual that came with your monitor if you are not sure.)

To connect a television and turn on TV mirroring, do the following:

1Turn off your computer and connect the television according to the instructions in the previous section, “Connecting Video Equipment for Output From the Computer.”

Depending on the type of connectors your equipment has (S-video or composite video), your connection should look similar to one of the following illustrations.

Television used as a monitor with an S-video connection

Æ S-video

- Audio

S-video In

Audio In ports

output port

output ports

port

(left and right)

(left and right)

TV

S-video cable

Dual RCA-plug cable

(available at most electronics supply stores)

30Chapter 2

Page 30
Image 30
Apple G3 Minitower manual Connecting a Television, Video Audio, Output port Output ports