10 Replace the sheet metal shield you removed earlier. Then reinsert the screws and tighten them.
Note: Do not replace the sheet metal shield if you’re installing a removable storage device
such as a tape drive. If a specialized sheet metal shield came with the device, install it instead
and replace the screws. Otherwise, insert the screws into the drive carrier and tighten them.
11 Replace the plastic faceplate.
Note: If the device is a removable storage device such as a tape or cartridge drive, do not
install the faceplate you removed earlier. If a new faceplate is included with the removable
storage device, install it instead.
12 Carefully lay the computer on its side.
13 Proceed to “Closing the Computer,” next.
Snap the plastic faceplate back into place.
Sheet metal shield
Reinstall both screws.
Installing PCI Cards, Memory, and Internal Storage Devices 65